How To Remove Deck Nails Without Damaging Wood

There will come a time that yous may demand to remove some or all of your ultra decking boards. Y'all may desire to update an old decking using new materials. Or you're trying to supersede a few rotten or broken boards. Whichever the case, there are several means to remove them. However, most people will jump right into it, non minding the damage. How to remove decking boards without damaging your nails. But if you want to preserve the surrounding materials, the nails, or the decking frame, yous will want to be more careful.

Removing the Decking Without Damaging the Nails

When removing the boards carelessly, the nails tin get damaged. Not simply can broken nails damage surrounding structures or hurt someone, but they tin also be tricky to remove. If you programme to reuse the decking boards for other purposes or still use the existing decking frame, you lot will want to cause equally little damage as possible. Here are some things that you can endeavor.

Using a Hammer

A hammer is the all-time tool to drive nails deep into the boards. But it's also the all-time tool to remove them slowly and advisedly using the claw cease of the hammer. However, most people volition carelessly yank the nails out. Pulling information technology that way tin can intermission the nails and damage the wood. Instead, gently stone the hook side hammer until the nails pop out.

You tin can also use a slice of wood and identify it under the hammer as you pull out the deck nails. The wood acts as a barrier preventing dents from the pressure, useful if you plan to reuse the wood. The piece of wood tin can also provide leverage for better smash extraction. Using the same method, gently remove all other nails used on the decking boards. Once finished, lift the decking boards and remove them.

.

Using a Crowbar

If you can't remove the nails using a hammer, you lot can endeavor forcing the board out using a crowbar. Simply considering y'all don't want to damage the decking nails, yous will desire to be careful. To do this, y'all can use two crowbars. First, pry one end of the decking boards carefully. If possible, use a hammer to remove the nails beginning. Then, offset prying the decking boards with i of the crowbars.

Apply weight on one of the crowbars while holding it in place. Next, grab the other crowbar and pry the decking lath farther while all the same putting pressure on the start one. Then, equally you lot're holding the 2d crowbar in identify, take the first 1 and pry further into the decking boards' length. Exercise this until you remove the entire decking lath.

Cutting the Decking Boards

In some cases, you may demand to cut the decking boards to make information technology easier to remove the nails without dissentious both the decking boards and the nails. For instance, if the decking board is as well long, it volition probable intermission if you pull them out. In this example, cut them in half volition reduce the chance of snapping them. For this, y'all will need a circular saw or reciprocating saw to cut through the decking boards while avoiding the joists, especially if y'all withal want to use the deck frame.

Another scenario y'all will want to cutting the boards is when the nails are too deep into the decking boards. For this, you can use a plug cutter drill bit. With it, y'all can create a recess effectually the nails, exposing the nail heads. Doing so makes it easier to attain the decking nails and employ tools to remove them. The disadvantage of doing this, however, is that it will leave holes on your decking boards.

Besides the usual hammer and the crowbar, you tin can notice several other tools on the cyberspace that y'all can apply to remove the nails from decking boards safely. Some of the usual tools y'all tin can utilise are "cat's mitt" and nippers to reach buried blast heads. If yous removed the decking boards using crowbars, but the deck nails are still intact, you tin utilize some tools that button them out safely. If information technology doesn't piece of work, you may endeavour pushing or driving the nails through the wood.

Since there are several tools and methods you can choose from, you may want to check out each of them. You can use review websites, groups and forums, and videos to know more about these tools. You lot can likewise ask an expert for advice. If you are withal unsure, you can always hire a contractor to remove information technology for y'all.

Source: https://ultradecking.co.uk/how-to-remove-deck-boards-without-damaging-your-nails/

Share this post